NorthEast Hazmat Inc.
Super Dragin Pump Mini
Super Dragin Pump Mini
Hazmat overloading and overfilling will not be a danger in the workplace when you have the Super Dragin Pumps. Exclusively available in the USA through NorthEast Hazmat Inc., these pumps make complex hazmat handling jobs quick, safe, and easy.
Technical Specifications
Technical Specifications
Standard Kit (Vacuum In)
Standard Kit (Vacuum In)
Your compressor needs to have a free air delivery capacity of:
Minimum of 255 LPM (9 CFM) @ 100 PSI
For Best Performance: 481 LPM (17 CFM) @ 100 PSI
You will be able to
vacuum up to:
105 LPM (28 GPM)
With a vertical suction
lift of up to:
2.5 M (8.2 ft.)
You will be able to pump
out up to:
Does not pump out
With a vertical pumping
lift of up to:
Does not pump out
The maximum vacuum within the drum will be up to:
-35.5 kPa (-10.5 inHg)
With a vertical pumping lift of up to:
N/A
Reversa Kit (Vacuum In and Pump Out)
Reversa Kit (Vacuum In and Pump Out)
Your compressor needs to have a free air delivery capacity of:
Minimum of 707 LPM (25 CFM) @ 100 PSI
For Best Performance: 850 LPM (30 CFM) @ 100 PSI
The Reversa function may not work correctly if the flow rate is less than 481 LPM (17 CFM). Depending on the brand, this is usually a compressor with at least 5.5hp.
You will be able to vacuum
up to:
105 LPM (28 GPM)
With a vertical suction lift
of up to:
2.5 M (8.2 ft.)
You will be able to pump
out up to:
50 LPM (13 GPM)
With a vertical pumping
lift of up to:
2.0 M (6.5 ft.)
The maximum vacuum within the drum will be up to:
-35.5 kPa (-10.5 inHg)
With a vertical pumping lift of up to:
17.2 kPa (5 inHg)
These values were measured using water and standard kits. Note that actual performance may vary depending on the fluid which is being collected, vertical lift, and the length and diameter of the hose being used.